Minicom Advanced Systems Remote Power Switch Instrukcja Użytkownika Strona 22

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 24
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 21
OPERATING GUIDE
21
Note:The configuration of Set SNMP Trap Receiver is only for the SNMP
Network Manager.
Follow the rest of the instructions as set out on the Telnet Main Menu.
25. Updating the firmware
Firmware updates can be found on our Website www.minicom.com. Please check
periodically.
To update the firmware:
1. Open the SNMP Utility (explained in the Quick Installation Guide) and click
Download Firmware. The Firmware Download box appears.
2. Browse to locate the new firmware file (*.bin).
3. Press Start. During the upgrade, the RPS red and yellow LEDs flash
alternately. On completion the RPS reboots.
Note: If uploading was interrupted, repeat the firmware update process.
Przeglądanie stron 21
1 2 ... 17 18 19 20 21 22 23 24

Komentarze do niniejszej Instrukcji

Brak uwag